Hotpoint Washing machine Repairs Error Codes

Hotpoint washing machines are among the most coarse found in the Uk and like any mechanical gismo they will occasionally breakdown or create a fault and need repairs. Being a very popular make means that most parts provider will keep there parts in stock and because so many suppliers keep Hotpoint parts stock this also drives competition hence driving down the price of parts if you should ever need them

One qoute many population together with some engineers face when faced with a faulty Hotpoint washer is knowing what the error code mean, so here are a list of error codes and there meanings for Hotpoint washing machines

Kitchenaid Blender

These error codes can some times have a E in front of the whole and not a F as shown here, but the meaning of the code is still the same

# F10 - This means there is No cold fill. You should check and verify that the taps are on or the hoses are kinked.

# F11 - This means there is No hot fill.The ambient temperature is probably below frosty perhaps due to the plumbing becoming frozen. Also verify that the taps are on or if the drain hoses are kinked.

# F12 - This means No mixed fill. It is most likely that the water is not turned on usually under the sink taps.

# F13 - For this error code you should check the water supply, inlet operate gismo as well as hot and cold hose pipe connections.

# F14 - A This error code means a qoute with the water heating principles has taken place. You will need to book a washing motor repair

# F15 - Water is not getting pumped away and a flood situation can take place. Verify that the discharge hose is elevated to the advised minimum height and that the pipe is not blocked.

# F16 - Very high water level Disconnect or turn off the water provide and make sure that the water level does not increase any more. Then you will need to find and Book a washing motor heal engineer

# F17 - Door not concluded properly. Close door firmly and the motor should work Ok now, if plainly conclusion the door firmly does not fix the problem, you will need to find and book a washing motor repairs engineer.

# F20/1 - The actual thermistor resistance has drifted or the temperature scanning sequence is incorrect. The ambient temperature could be below freezing. You will need to Book a washing motor heal engineer.

# F30/31 - A motor drive qoute has occurred. Try running the programme again. If the qoute persists book a aid engineer.

# F40 - Water was below the security level while a heat step. You will need to Book a washing motor repair.

# F41 - Water level detection sequence is incorrect. You will need to Book a washing motor repair.

# F50/51 - Re-programme needed, the buyer language and wash programme have not been saved. The principles will run with default conditions (1000rpm max and English language). Book a washing motor heal to re-programme your product.

Hotpoint Washing machine Repairs Error Codes